Thursday 17 March 2016

Usage of Bricks in a Residential & Commercial Building


The most obvious component of a residential and commercial building is its brickwork. The size, texture, color and joint finish of the bricks will combine to give a particular look. Decisions on brickwork must have to complement with the building style, roofing material, window & door frame color as well as landscaping style and driveway.



A significant Brickwork Company in London must provide computer generated color matching service that helps a property to attain a look they want. The job is to study and construct the perpendicular walls from perfectly horizontal layers of bricks. All corners should be exactly square to each other unless specified otherwise. Some builders prefer to set out a slab with chalk lines to delineate the exact location of brick walls. This whole procedure makes the bricklayer’s task easier and less complicated.

When bricklayers arrive on the site, they must have brick’s sand, cement, waterproofing additive, wall ties, lintels, reinforcing rods, all doors & windows frames, flashing material and their accessories accessible to them.


Bricklayers commonly work in teams of between 2 to 4. The part of bricks in construction takes the longest time because it is pretty labor intensive. Having a large on-site team isn’t a good practice because the variation between finishes is likely to happen. Furthermore, the weight of fresh brickwork can possibly invite slumping of lower bedding joints in damp and cool weather.
The bricklayers should brush down any sand that has accumulated on the footing & sand. To prevent moisture, a mortar mix with waterproof additive should be smeared about 5mm thick over the whole upright edge of the slab.


When the building plans are drawn up, all the wall lengths & openings will need to be in brick-course length. Unfortunately, the dimension of bricks is not always what Brickwork Contractors in London claimed, so the bricklayers need to be given the clear instruction of bricks as to the type of finish that’s required.

0 comments:

Post a Comment